HIGH QUALITY, HARD TO GET AND CUSTOM ELECTROLYTIC CAPACITORS FOR POWER SUPPLIES, DISPLAYS, TVs, MOTHERBOARDS AND MORE!

Power Supply Build Quality Pictorial/Discussion

Hardware Insights specializes in power supplies. In this part of the forum, you will find detailed information on every aspect of power supplies, including how to repair them and how to judge if a power supply is a good quality unit or not.

Re: Power Supply Build Quality Pictorial/Discussion

Postby shovenose » May 31st, 2012, 9:31 pm

LOL chris!
User avatar
shovenose
Seasoned Veteran
 
Posts: 1898
Joined: March 16th, 2011, 5:36 pm

Re: Power Supply Build Quality Pictorial/Discussion

Postby c_hegge » May 31st, 2012, 9:45 pm

You beat me to it. $10 Power supplies should never be purchased or used. Read the El-cheapo power supply round up
User avatar
c_hegge
Seasoned Veteran
 
Posts: 1632
Joined: March 16th, 2011, 8:45 pm
Location: North Coast, NSW, Australia

Re: Power Supply Build Quality Pictorial/Discussion

Postby duckula » June 15th, 2012, 5:51 pm

Corsair AX1200i 80plus platinum certified PSU. :clap: OEM is Flextronics.
Attachments
4.JPG
4.JPG (45.53 KiB) Viewed 23789 times
3.JPG
3.JPG (49.79 KiB) Viewed 23789 times
2.JPG
2.JPG (48.35 KiB) Viewed 23789 times
1.JPG
1.JPG (54.8 KiB) Viewed 23789 times
User avatar
duckula
Moderator
 
Posts: 1178
Joined: March 16th, 2011, 7:06 pm

Re: Power Supply Build Quality Pictorial/Discussion

Postby c_hegge » June 15th, 2012, 7:23 pm

Looks a little better than the CWT ones with the finless heat sinks
User avatar
c_hegge
Seasoned Veteran
 
Posts: 1632
Joined: March 16th, 2011, 8:45 pm
Location: North Coast, NSW, Australia

Re: Power Supply Build Quality Pictorial/Discussion

Postby duckula » June 15th, 2012, 10:30 pm

Like those heat sinks in the new Corsair GS series units? :D
Attachments
GS.jpg
GS.jpg (186.69 KiB) Viewed 23781 times
User avatar
duckula
Moderator
 
Posts: 1178
Joined: March 16th, 2011, 7:06 pm

Re: Power Supply Build Quality Pictorial/Discussion

Postby c_hegge » June 16th, 2012, 12:31 am

Nope. I think I see Samxon GF series caps in there too.
User avatar
c_hegge
Seasoned Veteran
 
Posts: 1632
Joined: March 16th, 2011, 8:45 pm
Location: North Coast, NSW, Australia

Re: Power Supply Build Quality Pictorial/Discussion

Postby shovenose » June 16th, 2012, 6:57 am

It's odd they use a high quality panasonic capacitor in the primary where it really doesn't matter quite as much
User avatar
shovenose
Seasoned Veteran
 
Posts: 1898
Joined: March 16th, 2011, 5:36 pm

Re: Power Supply Build Quality Pictorial/Discussion

Postby c_hegge » June 16th, 2012, 6:44 pm

With APFC, yes it does. It stresses the big cap more than the normal voltage doubler function. In fact, if a PFC Circuit is badly designed, it will kill a Panny.
User avatar
c_hegge
Seasoned Veteran
 
Posts: 1632
Joined: March 16th, 2011, 8:45 pm
Location: North Coast, NSW, Australia

Previous

Return to POWER SUPPLIES!

Who is online

Users browsing this forum: No registered users and 34 guests