HIGH QUALITY, HARD TO GET AND CUSTOM ELECTROLYTIC CAPACITORS FOR POWER SUPPLIES, DISPLAYS, TVs, MOTHERBOARDS AND MORE!

Would you trust CapXon/OST in an 80 plus Gold PSU?

Hardware Insights specializes in power supplies. In this part of the forum, you will find detailed information on every aspect of power supplies, including how to repair them and how to judge if a power supply is a good quality unit or not.

Would you trust CapXon/OST in an 80 plus Gold PSU?

Postby Pentium » June 4th, 2013, 3:09 pm

I have an FSP PSU that's 80 plus gold with a 120mm fan. All the caps are CapXon and OST...should I still do the normal replace on sight or leave them for a while since the PSU will run so cool? They already have about 13,000 running hours on them with the PSU probably averaging 100W load
Pentium
Veteran Member
 
Posts: 106
Joined: December 31st, 2012, 12:06 pm

Re: Would you trust CapXon/OST in an 80 plus Gold PSU?

Postby c_hegge » June 4th, 2013, 3:38 pm

If the PSU is used, I'd replace them (or at least test them). If it were brand new, then you could see how it goes for a couple of years.
User avatar
c_hegge
Seasoned Veteran
 
Posts: 1632
Joined: March 16th, 2011, 8:45 pm
Location: North Coast, NSW, Australia

Re: Would you trust CapXon/OST in an 80 plus Gold PSU?

Postby Pentium » June 4th, 2013, 3:39 pm

I let it run in my server 24/7 for about 18 months, and I'm not sure if I want to recap it or not :D It was brand new when I bought it
Pentium
Veteran Member
 
Posts: 106
Joined: December 31st, 2012, 12:06 pm

Re: Would you trust CapXon/OST in an 80 plus Gold PSU?

Postby shovenose » June 5th, 2013, 1:32 pm

I'd say it's fine IMO.
User avatar
shovenose
Seasoned Veteran
 
Posts: 1898
Joined: March 16th, 2011, 5:36 pm


Return to POWER SUPPLIES!

Who is online

Users browsing this forum: No registered users and 30 guests

cron