HIGH QUALITY, HARD TO GET AND CUSTOM ELECTROLYTIC CAPACITORS FOR POWER SUPPLIES, DISPLAYS, TVs, MOTHERBOARDS AND MORE!

Interesting PSU Component Failure

Hardware Insights specializes in power supplies. In this part of the forum, you will find detailed information on every aspect of power supplies, including how to repair them and how to judge if a power supply is a good quality unit or not.

Interesting PSU Component Failure

Postby steenss » October 4th, 2013, 8:40 pm

Hi all.

Anyone seen a metalized poly cap fail like this before?

531s-2.jpg
531s-2.jpg (114.5 KiB) Viewed 18600 times


AcBel compact PSU from a Dell 531s. Possibly marginal with only 17A @ 12V & A64x2 5000+, 4MB DDR2 800 & Radeon HD3450.

531s-1.jpg
531s-1.jpg (192.03 KiB) Viewed 18600 times


Torn down PSU with component spot between the coils. The unit had arcing sound on being plugged in & sometimes while running. The electrolytics are LTEC except for primaries which are Elite... Heat's a killer for these things. Replaced the stamped fan grill guard with a wire one. Seems to run fine now.

531s-3.jpg
531s-3.jpg (188.19 KiB) Viewed 18600 times
steenss
Member
 
Posts: 14
Joined: November 5th, 2012, 11:48 pm

Re: Interesting PSU Component Failure

Postby c_hegge » October 5th, 2013, 12:17 am

Interesting failure indeed. That usually only happens when the PSU gets a power surge. I assume that the one attached to the AC receptacle is fine?
User avatar
c_hegge
Seasoned Veteran
 
Posts: 1632
Joined: March 16th, 2011, 8:45 pm
Location: North Coast, NSW, Australia

Re: Interesting PSU Component Failure

Postby steenss » October 6th, 2013, 4:45 am

The other MPX cap is OK. The MOV should have mopped up the surge, but with X caps in parallel I guess they cop the spike.
steenss
Member
 
Posts: 14
Joined: November 5th, 2012, 11:48 pm

Re: Interesting PSU Component Failure

Postby c_hegge » October 7th, 2013, 12:42 am

That's what I would have thought. Maybe it was just a dud cap.
User avatar
c_hegge
Seasoned Veteran
 
Posts: 1632
Joined: March 16th, 2011, 8:45 pm
Location: North Coast, NSW, Australia

Re: Interesting PSU Component Failure

Postby LongRunner » May 5th, 2015, 10:25 pm

I know it's an old thread, but I found something to add.

Apparently it's not that rare for X2 capacitors to fail. It tends to go unnoticed much of the time though as they normally fail with reduced capacitance or open-circuit (as they are designed to!). It seems that there are some complaints about Carli MPX caps (as seen there). I made a new thread about these "eX-capacitors" (yeah, I know that pun is bad). It's when they are used as droppers that the failure shows (although "high stability" variants, with series instead of mono construction, should really be used there).

At least the ceramic Y capacitors seem to be quite bulletproof, even if they have miserable temperature coefficients of capacitance (Y5U is about as good as they get, with the exception of sub-nF models). Film Y capacitors aren't often seen (certainly not in PC PSUs) so I can't really say.
Information is far more fragile than the HDDs it's stored on. Being an afterthought is no excuse for a bad product.

My PC: Core i3 4130 on GA‑H87M‑D3H with GT640 OC 2GiB and 2 * 8GiB Kingston HyperX 1600MHz, Kingston SA400S37120G and WD3003FZEX‑00Z4SA0, Pioneer BDR‑209DBKS and Optiarc AD‑7200S, Seasonic G‑360, Chenbro PC31031, Linux Mint Cinnamon 20.3.
User avatar
LongRunner
Moderator
 
Posts: 1030
Joined: May 17th, 2013, 5:48 pm
Location: Albany, Western Australia


Return to POWER SUPPLIES!

Who is online

Users browsing this forum: No registered users and 4 guests

cron