Re: Improving the reviews
Posted: December 3rd, 2014, 3:47 pm
You're right, it is 10uF. I had another look at the load tester and that is indeed what I have in there. The probe is clipped onto the output pin of the switch, and the ground wire to the piece of wire that grounds the caps.
That article is a bit overdue for an update. I don't actually use that long skinny ghetto load tester anymore. I have also tested it with the two capacitors connected directly to the output connector (without the switch in between), and the probes straight on to the caps. It makes no difference compared to how I have it on the load tester.
That article is a bit overdue for an update. I don't actually use that long skinny ghetto load tester anymore. I have also tested it with the two capacitors connected directly to the output connector (without the switch in between), and the probes straight on to the caps. It makes no difference compared to how I have it on the load tester.