HIGH QUALITY, HARD TO GET AND CUSTOM ELECTROLYTIC CAPACITORS FOR POWER SUPPLIES, DISPLAYS, TVs, MOTHERBOARDS AND MORE!

How to braid cables

Discuss the Reviews and Articles on hardwareinsights.com here!

How to braid cables

Postby LongRunner » December 29th, 2021, 3:12 am

http://www.hardwareinsights.com/braiding-cables/

As I mentioned within the article, YMMV on the practicality of this; still, it seems to me a better use of the technique(s) than just braiding hair, and any of the listed methods is more practical than individually sleeved cores :lol2:

I think I've done alright photo-wise considering the old camera (apart from that server group harness, which I took under a pendant light at night; although I adjusted the gamma to make it look less-bad, and may re-shoot that item in its current form later), hope that's satisfactory for these "side" articles.
I ought to also have illustrations of how to extract the contacts, but maybe when I feel better…
Information is far more fragile than the HDDs it's stored on. Being an afterthought is no excuse for a bad product.

My PC: Core i3 4130 on GA‑H87M‑D3H with GT640 OC 2GiB and 2 * 8GiB Kingston HyperX 1600MHz, Kingston SA400S37120G and WD3003FZEX‑00Z4SA0, Pioneer BDR‑209DBKS and Optiarc AD‑7200S, Seasonic G‑360, Chenbro PC31031, Linux Mint Cinnamon 20.3.
User avatar
LongRunner
Moderator
 
Posts: 1054
Joined: May 17th, 2013, 5:48 pm
Location: Albany, Western Australia

Re: How to braid cables

Postby Behemot » December 31st, 2021, 5:08 am

yeah looks OK

I think one of the disadvantages of velcro is also some kinds of dirt stick to it.

Some SATA appear to use same technique of connection to the wires as IDE connectors used, which is pretty much similar to Krone terminals for structured cabling - wires are pressed between two blades. Those kinds of connectors should also be removable, but careful re-assembly is needed to assure good connection.
User avatar
Behemot
Administrator
 
Posts: 451
Joined: November 28th, 2014, 8:57 am
Location: CZ

Re: How to braid cables

Postby LongRunner » February 5th, 2022, 9:14 am

Added a warning regarding extracting the terminals of crimped SATA power connectors (it's very easy to break tabs off the shell when doing it wrongly).
User avatar
LongRunner
Moderator
 
Posts: 1054
Joined: May 17th, 2013, 5:48 pm
Location: Albany, Western Australia


Return to Content Comments

Who is online

Users browsing this forum: No registered users and 13 guests