HIGH QUALITY, HARD TO GET AND CUSTOM ELECTROLYTIC CAPACITORS FOR POWER SUPPLIES, DISPLAYS, TVs, MOTHERBOARDS AND MORE!

How to take apart Dell E152FPb Monitor?

Discuss general technology and news here.

How to take apart Dell E152FPb Monitor?

Postby shovenose » June 19th, 2011, 6:50 pm

There are no obvious screw holes. Do I just pry?
Thanks!
User avatar
shovenose
Seasoned Veteran
 
Posts: 1898
Joined: March 16th, 2011, 5:36 pm

RE: How to take apart Dell E152FPb Monitor?

Postby c_hegge » June 20th, 2011, 12:41 am

If there are no screws, then I always pry. I haven't taken a dell monitor apart beofre, though.
No wonder it doesn't work! You installed the coils backwards! :D
User avatar
c_hegge
Seasoned Veteran
 
Posts: 1632
Joined: March 16th, 2011, 8:45 pm
Location: North Coast, NSW, Australia

RE: How to take apart Dell E152FPb Monitor?

Postby shovenose » June 21st, 2011, 5:12 pm

I decided to not take it apart right now. I will when it dies completely though :-) it smells bad after I left it on for 6 hours laying on hte back so the heat ws up against the insidi of the screen the whole time/
User avatar
shovenose
Seasoned Veteran
 
Posts: 1898
Joined: March 16th, 2011, 5:36 pm

RE: How to take apart Dell E152FPb Monitor?

Postby duckula » June 22nd, 2011, 6:26 pm

That's good.
Please feel free to point out any mistakes in my messages. That will be helpful for me to make less mistakes in the future. :-)
Any help will be appreciated.:thnx:
User avatar
duckula
Moderator
 
Posts: 1178
Joined: March 16th, 2011, 7:06 pm

RE: How to take apart Dell E152FPb Monitor?

Postby shovenose » June 22nd, 2011, 7:00 pm

What is good?
User avatar
shovenose
Seasoned Veteran
 
Posts: 1898
Joined: March 16th, 2011, 5:36 pm


Return to General Tech Discussion/News

Who is online

Users browsing this forum: No registered users and 20 guests