HIGH QUALITY, HARD TO GET AND CUSTOM ELECTROLYTIC CAPACITORS FOR POWER SUPPLIES, DISPLAYS, TVs, MOTHERBOARDS AND MORE!

Antec Goes 80Plus Platinum With New Earthwatts

Discuss general technology and news here.

Antec Goes 80Plus Platinum With New Earthwatts

Postby duckula » December 1st, 2011, 4:55 pm

User avatar
duckula
Moderator
 
Posts: 1178
Joined: March 16th, 2011, 7:06 pm

Re: Antec Goes 80Plus Platinum With New Earthwatts

Postby duckula » December 1st, 2011, 4:57 pm

Probably based on the FSPxxx-80ETN platform. No idea about the topology, though.

http://www.plugloadsolutions.com/80Plus ... =37&type=2
User avatar
duckula
Moderator
 
Posts: 1178
Joined: March 16th, 2011, 7:06 pm

Re: Antec Goes 80Plus Platinum With New Earthwatts

Postby shovenose » December 1st, 2011, 9:04 pm

FSP=tiny heatsinks.
User avatar
shovenose
Seasoned Veteran
 
Posts: 1898
Joined: March 16th, 2011, 5:36 pm

Re: Antec Goes 80Plus Platinum With New Earthwatts

Postby c_hegge » December 2nd, 2011, 1:49 am

^
http://hardwareinsights.com/2011/11/ ... -review/3/
Maybe, maybe not.That one has alright heatsinks, although on an 80plus platinum, it doesn't really matter that much. When the efficiency is over 90%, there's not much heat to be dissipated.

It's odd that Antec is using FSP as the OEM for these. They've only used them for the basiq series in the past. The newer earthwatts are made by Delta.

In any case, though, I doubt if I'll be able to get my hands on one to review.
User avatar
c_hegge
Seasoned Veteran
 
Posts: 1632
Joined: March 16th, 2011, 8:45 pm
Location: North Coast, NSW, Australia

Re: Antec Goes 80Plus Platinum With New Earthwatts

Postby duckula » December 27th, 2011, 3:10 pm

It's about time to unveil the mask. The EA platinum is merely a fine-tuned FSP Aurum. :s Unimpressive. I like the Japanese made caps on the secondary, though I dislike the CrapXon on the primary side.

Image
User avatar
duckula
Moderator
 
Posts: 1178
Joined: March 16th, 2011, 7:06 pm

Re: Antec Goes 80Plus Platinum With New Earthwatts

Postby c_hegge » December 27th, 2011, 5:03 pm

The caps are stressed more on the secondary side, so it's more critical there, but yes, a Japanese PFC capacitor would be better.
User avatar
c_hegge
Seasoned Veteran
 
Posts: 1632
Joined: March 16th, 2011, 8:45 pm
Location: North Coast, NSW, Australia


Return to General Tech Discussion/News

Who is online

Users browsing this forum: No registered users and 12 guests

cron